top of page
1663008559109.png

Sensorflow

K6a4aIRll5uIFCyEE

Product Dashboard
Edit
Production
QR
Connected Devices

Product Name

lights

Product Type

Hardware

Product ID

vIkUfLjPLx8pBWgO
Product Info
Add
Remove
Heading 5
Properties/ Schema
Check
Product Firmware

Your content has been submitted

An error occurred. Try again later

Production
Get Code

Device Name

User ID

Lastseen

1663008559109.png
lights
vIkUfLjPLx8pBWgO
1663008559109.png
lights
vIkUfLjPLx8pBWgO
1663008559109.png
lights
vIkUfLjPLx8pBWgO
1663008559109.png
lights
vIkUfLjPLx8pBWgO
1663008559109.png
lights
vIkUfLjPLx8pBWgO
1663008559109.png
lights
vIkUfLjPLx8pBWgO
1663008559109.png
lights
vIkUfLjPLx8pBWgO
1663008559109.png
lights
vIkUfLjPLx8pBWgO
1663008559109.png
lights
vIkUfLjPLx8pBWgO
1663008559109.png
lights
vIkUfLjPLx8pBWgO
1663008559109.png
lights
vIkUfLjPLx8pBWgO
1663008559109.png
lights
vIkUfLjPLx8pBWgO
1663008559109.png
lights
vIkUfLjPLx8pBWgO
1663008559109.png
lights
vIkUfLjPLx8pBWgO
#include #include "BluetoothSerial.h" #include #include #include #include #include BluetoothSerial SerialBT; Preferences preferences; BH1750 lightMeter; LiquidCrystal_I2C lcd(0x27, 16, 2); // LCD address is 0x27 String NAME = "
"; String header; String apikey; String userid; String deviceid; String ssid; String pass; String lightvalue = ""; int restartcpount = 0; HYPERWISOR_IOT Hyperwisorsensor; int E_delay; char buffer[10]; #define buzz 2 void setup() { esp_task_wdt_init(10, true); // Set the watchdog timer to 10 seconds Serial.begin(115200); // Disable sleep modes esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON); esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_SLOW_MEM, ESP_PD_OPTION_ON); esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_FAST_MEM, ESP_PD_OPTION_ON); delay(500); Wire.begin(); lightMeter.begin(); pinMode(buzz, OUTPUT); lcd.init(); lcd.backlight(); lcd.setCursor(0, 0); lcd.print("Sensorflow"); lcd.setCursor(0, 1); lcd.print("Light Sensor"); delay(3000); lcd.clear(); lcd.setCursor(0, 0); lcd.print("--Powered by"); lcd.setCursor(0, 1); lcd.print("NIKOLAINDUSTRY"); delay(3000); Serial.println(); delay(500); preferences.begin("my-app", false); delay(500); apikey = preferences.getString("apikey"); userid = preferences.getString("userid"); deviceid = preferences.getString("deviceid"); ssid = preferences.getString("ssid"); pass = preferences.getString("pass"); Hyperwisorsensor.init(apikey); delay(500); WiFi.disconnect(); delay(50); Serial.println("connecting..."); WiFi.setHostname(NAME.c_str()); WiFi.begin(ssid.c_str(), pass.c_str()); delay(240000); Serial.println("connected to"); Serial.println(ssid); Serial.println(pass); Serial.println(WiFi.localIP()); digitalWrite(buzz, HIGH); delay(2000); digitalWrite(buzz, LOW); lcd.clear(); delay(100); } void loop() { esp_task_wdt_reset(); // Reset the watchdog timer if ((WiFi.status() == WL_CONNECTED)) { Serial.println("Connected"); getsensorvalue(); String mysensordata = ("&LUX=" + String(lightvalue)); String jsonobj = Hyperwisorsensor.sendData(mysensordata); String response = Hyperwisorsensor.get_schema(); String delayvalue = Hyperwisorsensor.extractor(response, "delay"); int delayint = delayvalue.toInt(); Serial.println("getschema"); Serial.println(response); Serial.println("send data"); Serial.println(jsonobj); Serial.println("extractor delay"); Serial.println(delayint); digitalWrite(buzz, LOW); delay(delayint); } else { getsensorvalue(); digitalWrite(buzz, HIGH); startBT(); Serial.println("NOT RECIVED"); digitalWrite(buzz, HIGH); delay(50); digitalWrite(buzz, LOW); delay(50); restartcpount++; if (restartcpount == 1500) { Serial.println("Restarted"); ESP.restart(); } } } void getsensorvalue() { uint16_t lux = lightMeter.readLightLevel(); Serial.print("Light: "); Serial.print(lux); lightvalue = String(lux); delay(500); Serial.println(" lx"); lcd.clear(); lcd.setCursor(0, 0); lcd.print("Light: "); lcd.setCursor(7, 0); lcd.print(" "); lcd.setCursor(7, 0); lcd.print(lux); lcd.print(" lx"); } void startBT() { #if !defined(CONFIG_BT_ENABLED) || !defined(CONFIG_BLUEDROID_ENABLED) #error Bluetooth is not enabled! Please run `make menuconfig` to and enable it #endif SerialBT.begin(NAME.c_str()); if (SerialBT.available()) { String btdata = SerialBT.readString(); Serial.println(btdata); StaticJsonDocument jsonDoc; DeserializationError error = deserializeJson(jsonDoc, btdata); if (error) { Serial.print("deserializeJson() failed: "); Serial.println(error.c_str()); return; } String datatype = jsonDoc["Datatype"]; if (datatype == "wifiupdate") { String Nssid = jsonDoc["ssid"]; String Npass = jsonDoc["pass"]; preferences.putString("ssid", Nssid); preferences.putString("pass", Npass); Serial.println("wifiinfoupdated"); digitalWrite(buzz, HIGH); delay(5000); digitalWrite(buzz, LOW); delay(10); ESP.restart(); } else if (datatype == "wifiinfo") { Serial.println("datatype = wifiinfo"); String apikey = jsonDoc["apikey"]; String userid = jsonDoc["userid"]; String deviceid = jsonDoc["deviceid"]; String ssid = jsonDoc["ssid"]; String pass = jsonDoc["pass"]; if (ssid.length() > 0 && pass.length() > 0 && apikey.length() > 0) { preferences.putString("apikey", apikey); preferences.putString("userid", userid); preferences.putString("deviceid", deviceid); preferences.putString("ssid", ssid); preferences.putString("pass", pass); Serial.println(apikey); Serial.println(userid); Serial.println(ssid); Serial.println(pass); digitalWrite(buzz, HIGH); delay(2000); digitalWrite(buzz, LOW); delay(1000); digitalWrite(buzz, HIGH); delay(2000); digitalWrite(buzz, LOW); delay(1000); ESP.restart(); } } } }

Collapsible text is great for longer section titles and descriptions. It gives people access to all the info they need, while keeping your layout clean. Link your text to anything, or set your text box to expand on click. Write your text here...

bottom of page